Industrial Paints
Industrial Paints
Industrial Paints
Industrial Paints
Industrial Paints
Commercial Vehicle Sectors

‘PIONEER COATS’ is a leading Paint manufacturer, who can supply quality paints to leading Bus Body builders in India.

Read More

Auto Component

We have exact and perfect coating solutions for all auto components .

Read More

Industrial Machine Sectors, Engines & Pumps

We can supply primers and paints for CNC Machines, Engines & Pumps

Read More

Power & Electric Sectors

We can supply primers and paints for Power & Electric Sectors

Read More

Steel Pre Structures

We can supply primers and paints for Steel Pre Structures & Grating

Read More

Wood Coatings

We can supply Wood Coatings, PUD Coatings for Wood

Read More

Pipes & Tubes

We can supply paints for industrial Pipes & Tubes

Read More

Vehicle Sectors Auto Component Industrial Machines Power & Electric Steel Structures Wood Coatings Pipes & Tubes
 
Industrial Machine
Sectors, Engines & Pumps
 
We manufacture Epoxy anticorrosive primer and Polyurethane top coats. These products have excellent chemical resistance , oil / Lubricant resistance.
 
 
Machine Sectors, Engines & Pumps Machine Sectors, Engines & Pumps Machine Sectors, Engines & Pumps
     
Machine Sectors, Engines & Pumps Machine Sectors, Engines & Pumps Machine Sectors, Engines & Pumps
     
Machine Sectors, Engines & Pumps Machine Sectors, Engines & Pumps  
 
POLYURETHANE FINISH PAINT
 
Product Description :   2K Polyurethane top Coat based on Acrylic Resin
Recommended use : Automobile Products, Electrical Products, Machine Tools
Features : • Excellent durability
• Smooth & glossy finish.
• Excellent toughness
Physical Properties :
Colour Shade As per customer requirement
Volume Solids 45 (± 2 %)
D.F.T. 30 to 40 microns
Theoretical spreading rate 8 to 9 sq. meter @ D.F.T. 25-30 μ
Flash point Base - 24° C ; Hardner - 28° C
Sp. Gravity Base 1.20 (± 0.1) kg / Ltr.

Hardner 1.05 (± 0.05) kg / ltr

Surface Preparation : • Surface to be coated should be completely clean , dry and free from contamination.
• Remove oil & grease with suitable solvent or detergent
• Remove rust, mill scale and other loose material by wire mesh / abrasive blasting
Application :
Application Conditions

Ambient temperature shall be above 10°C and relative   
humidity shall be below 85%. Adequate ventilation shall be  
provided in confined spaces

Mixing Stir each component with mechanical stirrer before mixing
Mixing ratio

Paint : 4 parts, Hardner : 1 part , Thinner : 1 parts (by volume)

Application method

By air assisted spray gun

Pot Life

Minimum 4 hours at 30°C
(Pot life may be reduced at higher temperature)

Drying Time Surface Dry – 10 to 15 minutes

Touch Dry – 1.5 to 2 hours

Over Coating Minimum 6 hours
Typical undercoat Epoxy Primer OR P.U. Primer
   
Shelf Life Base : 12 months; Hardner : 6 months from the date of mfg.
 
TWO PACK EPOXY TOP COAT
 
Product Description :   EPOXY TOP COAT
Recommended use : Transformers , Radiators , Machine Tools, MS Tanks
Features : • Excellent Chemical Resistance 
• Smooth & glossy finish.
• Excellent adhesion
Physical Properties :
Colour Shade As per customer requirement
Volume Solids 50 (± 5 %)
D.F.T. 30 to 40 microns
Theoretical spreading rate 8 to 9 sq. meter @ D.F.T. 25-30 μ
Flash point Base - 26° C ; Hardner - 28° C
Sp. Gravity Base 1.20 (± 0.1 ) kg per Ltr.

Hardner 0.90 (± 0.05) kg / Ltr

 

Surface Preparation : • Surface to be coated should be completely clean , dry and free from contamination.
• Remove oil & grease with suitable solvent or detergent
• Remove rust, mill scale and other loose material by wire mesh / abrasive blasting
Application :
Application Conditions Ambient temperature shall be above 10°C and relative humidity shall be below 85%. Adequate ventilation shall be provided in confined spaces
Mixing Stir each component with mechanical stirrer before mixing
Mixing ratio Paint : 2 parts, Hardner : 1 part , Thinner : 1 parts (by volume)
Application method By air assisted spray gun
Pot Life Minimum 4 hours at 30°C
(Pot life may be reduced at higher temperature)
Drying Time Surface Dry – 20 to 30 minutes
Touch Dry – 3 to 4 hours
Over Coating Minimum 8 hours
Typical undercoat Epoxy Primer
Shelf Life Base : 12 months; Hardner : 12 months from the date of mfg.
 
TWO PACK EPOXY COAL TAR BLACK
 
Product Description :   EPOXY Anticorrosive Primer 
Recommended use : Steel Structures, traction batteries, Chemical plants , MS Tanks
Features : • Excellent Chemical Resistance 
• High Performance Corrosion control
• Quick Drying
• Can be applied on wet surface
Physical Properties :
Colour Shade Black
Volume Solids 55 (± 5 %)
D.F.T. 30 to 40 microns
Theoretical spreading rate 9 to 10 sq. meter @ D.F.T. 25 μ
Flash point Base - 26° C ; Hardner - 28° C
Sp. Gravity Base 1.25 (± 0.1 ) kg per Ltr.
Hardner 0.85 (± 0.05) kg / Ltr
Surface Preparation : • Surface to be coated should be completely clean , dry and free from contamination.
• Remove oil & grease with suitable solvent or detergent
• Remove rust, mill scale and other loose material by wire mesh / abrasive blasting
Performance Properties :

Acid / Alkali Resistance-  for 10% solution – 24 hours
Salt Spray – passes 300 hours

Application :
Application Conditions Ambient temperature shall be above 10°C and relative   
humidity shall be below 85%. Adequate ventilation shall be  
provided in confined spaces
Mixing Stir each component with mechanical stirrer before mixing
Mixing ratio Paint : 4 parts, Hardner : 1 part , Thinner : 1.5 parts (by volume)
Application method By air assisted spray gun/ airless spray gun
Pot Life Minimum 6 hours at 30°C
(Pot life may be reduced at higher temperature)
Drying Time Surface Dry – 20 to 30 minutes
Touch Dry – 4 to 5 hours
Typical undercoat Epoxy Primer
Shelf Life Base : 12 months; Hardner : 12 months from the date of mfg.
 
CHLORINATED RUBBER PAINT
Product Description :   Protective and chemical resistance paint
Recommended use : Steel Structures, traction batteries, Chemical plants , MS Tanks
Features : • Excellent Chemical Resistance & Acid –Alkali resistance 
• Water resistance
• Quick Drying
Physical Properties :
Colour Shade All Pigmented shades (except white)
Volume Solids 40 (± 5 %)
D.F.T. 25 to 30 microns
Theoretical spreading rate 5 to 6 sq. meter @ D.F.T. 25 μ
Flash point 23° C
Sp. Gravity Base 1.10 (± 0.1 ) kg per Ltr.
Surface Preparation : • Surface to be coated should be completely clean , dry and free from contamination.
• Remove oil & grease with suitable solvent or detergent
• Remove rust, mill scale and other loose material by wire mesh / abrasive blasting
Performance Properties :

Acid / Alkali Resistance-  for 10% solution – 24 hours
Salt Spray – passes 300 hours for total system

Application :
Application Conditions Ambient temperature shall be above 10°C and relative humidity shall be below 85%. Adequate ventilation shall be provided in confined spaces
Mixing Stir well with mechanical stirrer before mixing
Mixing ratio Paint : 2 parts, Thinner : 1 part (by volume)
Application method By air assisted spray gun
Drying Time Surface Dry – 10 to 15 minutes
Touch Dry – 15 to 20 minutes
Typical undercoat Epoxy Primer
Shelf Life Base : 12 months from the date of mfg.
 
SYNTHETIC Q.D. ENAMELS
 
Product Description :   Quick Drying Enamel Paints
Recommended use :

Steel Structures, Auto body –Commercial Vehicles & Auto parts

Features : • Excellent drying properties 
• Smooth & Glossy Finish
• Good Durability
Physical Properties :
Colour Shade As per customer’s requirement
Volume Solids 52 (± 3 %)
D.F.T. 25 to 30 microns
Theoretical spreading rate 8 to 9 sq. meter @ D.F.T. 25 μ
Flash point 26° C
Sp. Gravity Base 1.10 (± 0.1 ) kg per Ltr.
Surface Preparation : • Surface to be coated should be completely clean , dry and free from contamination.
• Remove oil & grease with suitable solvent or detergent
• Remove rust, mill scale and other loose material by wire mesh / abrasive blasting
Performance Properties :

Weathering- 100 hrs. (10% gloss reduction accepted)
Salt Spray – passes 140 hours for total system

Application :
Application Conditions Ambient temperature shall be above 10°C and relative
humidity shall be below 85%. Adequate ventilation shall be
provided in confined spaces
Mixing Stir well with mechanical stirrer before application
Mixing ratio Paint : 4 parts, Thinner : 1 part (by volume)
Application method

By air assisted spray gun

Drying Time

Surface Dry – 25 to 30 minutes
Touch Dry – 4 to 5 hours

Typical undercoat Q.D. Primer
Shelf Life 12 months from the date of mfg.
 
STOVING PAINT
Product Description :   Stoving Enamel Paint
Recommended use :

Auto body –Commercial Vehicles , Two wheelers , Auto components & steel Furniture 

Features : • Excellent Hardness
• Smooth & Glossy Finish
• Good Durability
Physical Properties :
Colour Shade As per customer’s requirement
Volume Solids 42 (± 3 %)
D.F.T. 30 to 35 microns
Theoretical spreading rate 5 to 6 sq. meter @ D.F.T. 25 μ
Flash point 23° C
Sp. Gravity Base 1.10 (± 0.1 ) kg per Ltr.
Surface Preparation : • Surface to be coated should be completely clean , dry and free from contamination.
• Remove oil & grease with suitable solvent or detergent
• Remove rust, mill scale and other loose material by wire mesh / abrasive blasting
Performance Properties : Weathering – 400 hrs. (10% gloss reduction accepted)
Salt Spray – passes 180 hours for total system
Petrol – Diesel resistance - Passes
Application :
Application Conditions Ambient temperature shall be above 10°C and relative   
humidity shall be below 85%. Adequate ventilation shall be  
provided in confined spaces
Mixing Stir well with mechanical stirrer before application
Mixing ratio Paint : 3 parts, Thinner : 1 part (by volume)
Application method By air assisted spray gun
Stoving schedule 120° C (± 5° C) for 30 minutes
Typical undercoat Stoving  Primer
Shelf Life 12 months from the date of mfg.
 
Two Pack Epoxy High Build Mastic Coating :
 
This Epoxy mastic coating is specially developed for application for untreated or unprepared surface. It can be apply on wet surface. It has excellent adhesion & Chemical resistance.
 
APPLICATION: This coating can be used as universal primer for steel structure, pipelines, tanks, Chemical plants. This primer can be over coated with Epoxy, P.U. or quick drying paints.
 
PRODUCT SPECIFICATIONS :
  • Excellent adhesion
  • Excellent Chemical Resistance
  • Longer Pot Life
  • Can achieve High D.F.T
  • 500-700 hours salt spray
 
Request a Quote
 

Manufacturers And Suppliers - Industrial Paints, Automobiles Paints, Primers, Thinners, Epoxy Paint, Polyurethane Paints, Chlorinated Rubber Paints, Wood Sealer, Wood Melamine